Belkin 8820AU00394 User Manual page 29

TROUblesHOOTInG, sUPPORT, anD WaRRanTY
a printer I plugged into the Usb port is
not showing up on my computer .
1 . Is the light on over the USB port that the printer is plugged into?
If not, try unplugging and re-plugging the printer . Please check
that the USB connector is firmly plugged into the Router .
2 . To print to a printer attached to the Router, your
computer must have that printer's driver installed .
Please check that the driver is installed .
3 . The printer may not be set to auto-connect . Via the Belkin Router
Manager, open the USB Print and Storage Center . Check that the
printer appears in the list of available devices . View the properties
of the printer, and check that "auto-connect" is selected .
a different sort of Usb device that I plugged into the
Usb port is not showing up on my computer .
Most USB devices other than disks and printers must be
accessed via the USB Print and Storage Center .
1 . Is the light on over the USB port that the device is plugged into?
If not, try unplugging and re-plugging the device . Please check
that the USB connector is firmly plugged into the Router .
2 . Via the Belkin Router Manager, open the USB
Print and Storage Center . Check that the device
appears in the list of available devices .
3 . Select the device and click the "Use" button . The device will be
virtually connected to your computer until you choose to "Stop
Using" the device, or another person requests use of the device .
27