List Of Replaceable Parts; How Toobtain Parts; Service Centers - Fluke 8020A Instruction Manual

INTRODUCTION
5-2. This section contains an illustrated parts
breakdown of the instrument. Components are listed
alpha-numerically by assembly. Electrical components
are listed by reference designation and mechanical
components are listed by item number. Each listed part is
shown in an accompanying illustration.
Parts lists include the following information:
5-3.
a.
Reference Designation or Item Number.
b. Description of each part.
FLUKE Stock Number.
d. Federal Supply Code for Manufacturers.
e. Manufacturer's Part Number or Type.
f.
Total Quantity per assembly or component.
Recommended Quantity: This entry indicates
the recommended number of spare parts
necessary to support one to five instruments for
a period of two years. This list presumes an
availability of common electronic parts at the
maintenance site. For maintenance for one year
or more at an isolated site, it is recommended
that at least one of each assembly in the
instrument be stocked. In the case of optional

List of Replaceable Parts

subassemblies, plug-ins, etc. that are not always
part of the instrument, or are deviations from the
basic instrument model, the REC QTY column
lists the recommended quantity of the item in
that particular assembly.
h.
The Use Code column is not used.
HOW TO OBTAIN PARTS
5-5. Components may be ordered from the nearest
Fluke authorized service center listed at the rear of this
manual. To ensure prompt and efficient handling of your
order, include the following information.
a. Quantity.
b. FLUKE Stock Number
Description.
d. Reference Designation or Item Number.
e. Printed Circuit Board Part Number.
f. Instrument Model Number and the Rev. letter
inked on pcb assembly.
Indicated devices are subject to damage by
static discharge.
Section 5