Using The Turntable; How To Replace The Stylus - DigiTech GE-4100 User Manual

USING THE TURNTABLE

• Press POWER button to ON position.
Set the Mode Knob to the PH (phonograph) position.
• Place the record on the turntable.
• Select the speed of record: 33, 45, 78rpm according to vinyl to played.
• Remove the stylus guard and push the lift lever upward to raise the tone arm from the
arm park, and then move the cartridge holder over the record gently, now the platter
will run automatically. Then put down the lever, the tone arm would drop and touch
record surface gently. Now users can enjoy their favorite songs.
• Push the arm lift lever up to raise the arm, now platter will still run but play will pause.
To continue the play, user just need to put down the lever.

HOW TO REPLACE THE STYLUS

To replace the needle, please refer to the instructions below.
Removing the needle form the cartridge
A) Place a screwdriver at the tip of the needle heads hell and push downwards in the
direction shown in sketch "A"
B) Remove the needle head shell by pulling it forwards and pushing downwards.
Inserting the needle
C) Hold the tip of the needle head shell and insert it by pressing in the direction
illustrated by "B"
D) Push the needle head shell upwards in the direction illustrated by "C" until the
needle locks into the tip position.
6