Table of Contents
Advertisement
BATTERY INSTALLATION REMOTE CONTROL
1. Take off the protective paper on battery. Then install battery (1pc 3V Lithium Cell
CR2025 included) in battery compartment to respect polarity.
2. For replace new battery, open the battery case when replace the battery. Insert new
1pc 3V Lithium Cell (CR2025).
Note: Keep within 5 meter range, 30 degree angle while aiming at the unit.
PREPARATION FOR USE
• Carefully unpack the main unit from its carton (do not attempt to connect anything at
this stage).
• Keep any packaging in case you want to transport the main unit at some later date.
• Connect the AC Power cord to the AC outlet.
• Unwind the FM antenna.
• To adjust the sound, turn the Volume Knob located on the Right side of your system in
any mode.
USING THE CD PLAYER
Loading CDs
• Press POWER button to ON position. Set the Mode Knob to the CD position.
• Press the OPEN/CLOSE button to open the CD door. Do not force open the CD door
by hand at any time.
• Place the CD in the compartment with the label side facing upwards.
• Press OPEN/CLOS to Close the CD door.
Playing CDs
• Press PLAY/PAUSE button to play/pause, when pause, LED screen will indicate II.
• Press Stop Button, will stop playing.
• To resume play, press the Play/Pause Button again.
• Press the Play/Pause Button again.
• Press the PREV/NEXT Button to enter into last/next songs.
Notes:
• Do not put anything other than a CD in the compartment. Other objects can damage
the mechanism.
• Do not force open/close the CD door by hand at any time.
• Keep the CD door closed when not in use to prevent dirt and dust from getting into
the mechanism.
• Never insert more than one CD at a time.
• If a disc is deeply scratched or too dirty, it may not play.
1
2
5
Hide quick links:
Advertisement
Table of Contents
