External Control Device Setup; Rs-232C Setup - LG 50PH470H Owner's Manual

EXTERNAL CONTROL dEVICE SETUP

RS-232C Setup

• Image shown may differ from your TV.
Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V
control system) to control the product's functions externally.
Connect the serial port of the control device to the RS-232C jack on the product back panel.
NOTE
RS-232C on this unit is intended to be used with third party RS-232C control hardware and software.
y y
The instructions below are provided to help with programming software or to test functionality using
telenet software. RS-232C connection cables are not supplied with the product.
Set ID
1 Press SETTINGS to access the main menus.
Press the Navigation buttons to scroll to OPTION and press OK.
2
3 Press the Navigation buttons to scroll to Set ID and press OK.
4 Scroll left or right to select a set ID number and select CLOSE. The adjustment range is 1-99.
5 When you are finished, press EXIT.
RS-232C IN
(CONTROL & SERVICE)
EXTERNAL CONTROL DEVICE SETUP
49