Table of Contents
Advertisement
36
PENTOUCH
Using the Touch Pen with a TV
This section uses illustrations of the 60PH670H.
y
y
1. Connect the dongle to the USB port of the TV.
1
USB IN
2. If the dongle is connected correctly, the dongle's indicator LED will turn on and a message will appear on the
TV to indicate that the dongle is connected.
3. Follow the steps below to pair the dongle with the Touch Pen.
1
Check whether the red LED of the paired dongle is turned on.
2
Place the Touch Pen within 10 cm of the dongle.
3
Press the Power button of the Touch Pen once.
4
The indicator LED of the Touch Pen will turn green when pairing is complete.
NOTE
y
y
For a newly purchased or replaced Touch Pen, you need to pair it with the dongle again.
y
y
If the indicator LED is turned off, pairing has not been successful. Please try pairing again.
y
y
Once paired, the indicator LED will turn green when you press the power button.
y
y
Pairing is not possible when the battery is low.
y
y
If the Touch Pen does not work, reset the Touch Pen (See p.40) and try pairing again.
Dongle
Advertisement
Table of Contents
