Chapter 6 Installation; Tightening Torque; Surrounding Metal - Denso 1732 Series User Manual

Chapter 6 Installation

6.1 Tightening Torque

The tightening torque must be 19.8N･m for M18 nut, and 33.9N･m for M30 nut.

6.2 Surrounding Metal

M18 Type: Communication distance will drop significantly when the distance between the transceiver
and any surrounding metal is less than 25mm.
M30 Type: Communication distance will drop significantly when the distance between the transceiver
and any surrounding metal is less than 30mm.
14
Nut
Washer
For M18: more than 25mm
For M30: more than 30mm
Antenna
For M18: more than 25mm
For M30: more than 30mm