Center The Steering Gear; Align Pitman Shaft; Front Wheel Alignment - Taylor-Dunn C0-425-48 Service And Replacement Parts Manual

C0-425-48

CENTER THE STEERING GEAR

1: Rotate the input shaft clockwise until it stops.
2: While counting the rotations, rotate the input shaft counter clockwise until it stops.
3: Rotate the input shaft clockwise 1/2 the rotations counted in the previous step.
4: Mark the input and pitman shaft in relation to the housing.

ALIGN PITMAN SHAFT

5: Center the steering gear. Refer to Center the Steering Gear for information regarding centering the steering
gear.
6: Install the pitman arm parallel with the input shaft orientated as shown in the illustration.

FRONT WHEEL ALIGNMENT

Refer to the Front Axle section for front wheel alignment
procedure.
MC-425-13
Steering
Page 41