Security Settings - Nokia 6220 User Manual

Jesse draft_07_TA.fm Page 79 Thursday, May 22, 2003 8:22 AM
Press Menu, and select
select an enhancement menu if the corresponding enhancement is or
has been connected to the phone. Depending on the enhancement, you
can select some of the following options:
• Default profile to select the profile that you want to be automatically
activated when you connect to the selected enhancement. You can
select another profile while the enhancement is connected.
• Automatic answer to set the phone to answer an incoming call
automatically after five seconds. If the
Beep once or Off, automatic answer will not be in use.
• Lights to set the lights permanently On. Select
lights on for 15 seconds after a keypress.
• When the phone is connected to the full car kit, select
detector and On to automatically switch off the phone
approximately 20 seconds after you have switched off car's ignition.
• For Text phone , select
phone settings instead of headset or loopset settings.

Security settings

Note: When security features that restrict calls are in use (call barring,
closed user group and fixed dialling), calls may be possible to certain
emergency numbers in some networks (e.g. 112, 911 or other official
emergency numbers).
Press Menu, and select
• PIN code request to set the phone to ask for your PIN code every time
the phone is switched on. Some SIM cards do not allow the PIN code
request to be turned off.
• Call barring service (network service) to restrict incoming calls to and
outgoing calls from your phone. A barring password is required.
• Fixed dialling to restrict your outgoing calls and text messages to
selected phone numbers if this function is supported by your SIM
card. The PIN2 code is required.
When the fixed dialling is on, GPRS connections are not possible
except while sending text messages over a GPRS connection. In this
M e n u f u n c t i o n s
Settings and Enhancement settings. You can
Incoming call alert
Automatic
Use text phone and select Yes
Settings and Security settings. Select
is set to
to set the
Ignition
to use the text
79