Basic Steps For Accessing And Using Services; Setting Up The Phone For A Service - Nokia 6220 User Manual

Jesse draft_07_TA.fm Page 104 Thursday, May 22, 2003 8:22 AM
M e n u f u n c t i o n s

Basic steps for accessing and using services

1. Save the service settings that are required to access the service that
you want to use. See page 104.
2. Make a connection to the given service. See page 105.
3. Start browsing the pages of the service. See page 105.
4. Once you are finished browsing, end the connection to the service.
See page 106.

Setting up the phone for a service

You may receive the service settings as an over the air message from the
network operator or service provider that offers the service that you
want to use. You can also key in the settings manually or add and edit
the settings with PC Suite.
For more information and for appropriate settings, contact your
network operator or service provider that offers the service that you
want to use.
To receive the service settings over the air, see Over the air settings
service on page 21.
Keying in the service settings manually
1. Press Menu, and select Services,
2. Select Active service settings.
3. Scroll to the connection set you would like to activate and press
Activate.
You need to activate the connection set where you want to save the
service settings. A connection set is a collection of settings required
to make a connection to a service.
4. Select Edit active service
Select each of the settings one by one and key in all the required
settings according to the information you have received from your
network operator or service provider. Note that all the bearer related
settings are in the Bearer settings
104
Settings and Connection
settings.
menu.
settings.