Accessing The Security Menu; Locking Your Phone; Unlocking Your Phone; Changing The Lock Code - Sanyo SCP-5500 Operating Manual

Setting Your Phone's Security Setting Your Phone's Security Setting Your Phone's Security Setting Your Phone's Security

Accessing the Security Menu

Accessing the Security Menu Accessing the Security Menu Accessing the Security Menu
You must enter your lock code to view the Security menu.
To access the Security menu:
1. Press MENU/OK to access the main menu.
2. Select Settings Settings and press MENU/OK. Settings Settings
3. Select Security Security Security Security and press MENU/OK.
4. Enter lock code.
Tip: If you can't recall your lock code, try using the last four digits of either your Social Security Tip:
Tip: Tip:
number or PCS Phone Number or try 0000.

Locking Your Phone

Locking Your Phone
Locking Your Phone Locking Your Phone
When your phone is locked, your phone allows you to restrict the incoming calls and make calls
except 911 and special numbers.
To lock your phone:
1. From the Security Menu display (See "Accessing the Security Menu" on page 31), select Lock
Phone Phone and press MENU/OK. Phone Phone
2. Select Lock now Lock now or On Power
Lock now Lock now
3. Depending on your preference, highlight either Full Lock
MENU/OK.
Full Lock: All phone calls except for Emergency# or Special #s cannot be made. And no Full Lock: Full Lock: Full Lock:
●
phone calls can be received except for Special #s.
Except Incom.Calls.: Except Incom.Calls.: All phone calls except for Emergency# or Special #s cannot be made. Except Incom.Calls.: Except Incom.Calls.:
●
But all incoming calls can be received.
Tip: If you want to cancel the "On Power-up" setting before turning the phone off, select Tip Tip Tip
Unlocked during step 2 above. Unlocked
Unlocked Unlocked

Unlocking Your Phone

Unl ocking Your Phone
Unl Unl ocking Your Phone ocking Your Phone
To unlock your phone:
1. From the Locked display, press Unlock (left softkey).
2. Enter your lock code.

Changing the Lock Code

Changing the Lock Code Changing the Lock Code Changing the Lock Code
1. From the Security Menu display (See "Accessing the Security Menu" on page 31),
highlight Others Others and press MENU/OK.
Others Others
2. Highlight Change Lock Change Lock and press MENU/OK.
Change Lock Change Lock
3. Enter new lock code, 1234
4. Reenter the new lock code in the box under Reenter Cod
On Power- - - - u u u u p p p p and press MENU/OK.
On Power On Power
1234 for example, in the box under New Cod
1234 1234
Full Lock or Except Incom.Calls Except Incom.Calls and press
Full Lock Full Lock Except Incom.Calls Except Incom.Calls
New Code e e e .
New Cod New Cod
Reenter Code e e e .
Reenter Cod Reenter Cod
31
Lock Lock Lock