Wet Shaving; Dry Shaving; Cleaning And Maintenance - Philips S1070 Manual

-
When you use the shaver for
dry shaving, we advise you to
make sure your skin is fully dry
so that the shaver glides
smoothly over your skin.
- For best results on skin comfort,
pre-trim your beard if you have
not shaved for 3 days or longer.
- For optimal shaving results, make
circular movements during use.
- The shaver is waterproof and can
be used in the bath or shower.
- Your skin may need 2 or 3 weeks
to get accustomed to the Philips
shaving system.

Wet shaving

For a more comfortable shave, you
can also use this appliance on a wet
face with shaving foam or shaving
gel.
To shave with shaving foam or
shaving gel, follow the steps below:
1 Apply some water to your skin
(Fig. 6).
2 Apply shaving foam or shaving gel
to your skin (Fig. 7).
3 Rinse the shaving unit under the
tap to ensure that the shaving unit
glides smoothly over your skin
(Fig. 8).
4 Switch on the appliance.
5 Move the shaving heads over your
skin in circular movements to
catch all hairs growing in different
directions (Fig. 9). Exert gentle
pressure for a close, comfortable
shave.
Note: Rinse the shaving unit
regularly to ensure that it
continues to glide smoothly over
your skin (Fig. 8).
6 Dry your face.
7 Clean the appliance after use (see

'Cleaning and maintenance').

Note: Make sure you rinse all
foam or shaving gel off the
appliance.

Dry shaving

1 Switch on the appliance.
2 Move the shaving heads over your
skin in circular movements to
catch all hairs growing in different
directions (Fig. 9). Exert gentle
pressure for a close, comfortable
shave.
Note: Do not press too hard, this
can cause skin irritation.
3 Clean the appliance after use (see
'Cleaning and maintenance').
Trimming
You can use the trimmer to groom
your sideburns and moustache.
1 Push the trimmer release slide
downwards to open the trimmer
(Fig. 10).
2 Switch on the appliance.
3 Hold the trimmer perpendicular to
the skin and move the appliance
downwards while you exert gentle
pressure (Fig. 11).
4 After trimming, switch off the
appliance.
5 Clean the trimmer.
6 Close the trimmer ('click') (Fig. 12).
Cleaning and maintenance
Cleaning the shaver under the
tap
Clean the shaver after every shave
for optimal performance.
Always unplug and switch off the
appliance before you clean it.
Note: Water may leak from the socket
at the bottom of the shaver when
you rinse it. This is normal and not
dangerous because all electronics
are enclosed in a sealed power unit
inside the shaver.