Specifications - Simplicity SNAPPER 250 Z Operator's Manual

NOTE: Specifications are correct at time of printing and are subject to change without notice.
* Actual sustained equipment horsepower will likely be lower due to operating limitations and environmental factors.
ENGINE:
18.5 HP* Briggs & Stratton
Make Briggs & Stratton
Model 18.5 hp Intek
Horsepower 18.5 @ 2550 rpm
Displacement 30.6 Cu. in (502 cc)
Electrical System 12 Volt, 9 amp. Alternator, Battery: 230 CCA
Oil Capacity 48 Oz. (1.4 L) w/ Filter
CHASSIS:
Fuel Tank Capacity: 3.0 Gallons (11.4 L)
Rear Wheels Tire Size: 18 x 8.50-8
Inflation Pressure: 15 psi (1,03 bar)
Front Wheels Tire Size: 11 x 4.00-5
Inflation Pressure: 25 psi (1,72 bar)
CE COMPLIANCE SPECIFICATIONS:
Model
RPM's (Governed)
Kilowatts (kW) (@ Governed RPM's)
Unit Mass (kg)
Sound Power (LWA) (dBA)
Sound Pressure (LPA) (dBA)
Vibration (Hand) (m/s2)
Vibration (Body) (m/s2)
ERZT185440BVE (Snapper) ERZT185440BVE (Simplicity)
2550
13.8
273
100
86
9.8
0.7
TRANSMISSIONS:
Hydro-Gear
ZA-DHBB-2D5A-2DCX (LH)
ZA-AHBB-2D5A-2DCX (RH)
Type EZT
Hydraulic Fluid Sealed Unit
Speeds Forward: 0-6.2 MPH (0-9.98 km/h)
@ Specified rpm Reverse: 0-3 MPH (0-4.83 km/h)
Continuous Torque 115 ft. lbs. (155 N.m.)
Output
Maximum Weight 340 lbs. (154 Kg) per Axle
on Axle
DIMENSIONS:
Overall Length 72" (182,9 cm)
Overall Width 55" (139,7 cm)
Height 38" (96,5 cm)
Weight (apx.)
Snapper 601 lbs. (273 kg)
Simplicity 617 lbs. (280 kg)
2550
13.8
280
100
86
9.8
0.7
33

Specifications