NEC ME342U User Manual page 59

③ Set a password so that the logo will not be changed without authorization
This section explains the procedure for setting the password for the first time.
1. Move the cursor to [LOGO PASSWORD] in the sub-menu and press the ENTER button.
• The PASSWORD SETTING screen is displayed.
2. Move the cursor to "NEW PASSWORD" and press the ENTER button.
• The character input screen will be displayed. Enter the password using the ▲ ▼ ◀ ▶ buttons and press the
ENTER button.
• Only 1–10 alphanumeric characters are allowed to be used in the password.
• When the password is entered, it will be indicated by asterisks in the entry field.
3. Move the cursor to "CONFIRM NEW PASSWORD" and press the ENTER button.
• Enter the same password again.
4. Move the cursor to "OK" on the password setting screen and press the ENTER button.
The LOGO PASSWORD will be set.
TIP:
• How to erase the set LOGO PASSWORD
① Move the cursor to "LOGO PASSWORD" in the sub-menu and press the ENTER button.
② Press the ENTER button in the password entry screen.
③ Enter the password, move the cursor to "OK" and press the ENTER button.
The PASSWORD SETTING screen will be displayed.
④ Move the cursor to "NEW PASSWORD" and press the ENTER button.
• Move the cursor to "OK" without entering anything in the character input screen and press the ENTER button.
⑤ Move the cursor to "CONFIRM NEW PASSWORD" and press the ENTER button.
• Move the cursor to "OK" without entering anything in the character input screen and press the ENTER button.
⑥ Move the cursor to "OK" in the password setting screen and press the ENTER button.
The set LOGO PASSWORD will now be deleted.
48
4. Using the VIEWER