Tilt And Swivel Base; Transportation Packages - Philips 190P7 Service Manual

www.DataSheet.co.kr
19" LCD Color Monitor
5.9 Plastic mold tooling
•
Tooling to be designed to minimize cosmetic defects induced by molding process (sink, blush, weld lines, gate
marks, ejector marks, etc.).
•
Painting to cover up cosmetic defects due to molding is strongly discouraged.
5.10 Plastics flammability
•
All Plastics to be Flame Retardant UL 94-V0 or Better (if monitor weighs less than 18kg; UL94-V0 is OK).
•
All major plastic parts (bezel, back cover, base) need to be molded from same resin.
5.11 Texture/Glossing of housing
• The texture area and texture no should follow Philips make-up sheet.
• The exterior surfaces shall have a uniform texture.
• Philips must approve the mold texturing.
• Detail document for texture refer to UAN-D249.
• < = 20 gloss units

5.12 Tilt and swivel base

Tilt angle
Swivel angle
High adjustment : 130 mm
Portrait Display
5.13 Label
•
Regulatory label / Carton label should follow Philips requirement.
•
Detail document refer to Philips Engineering Reference Book.
5.14 Product dimension / Weight
• Unit dimension (incl. pedestal) : ?(W) * ? (H) * ? (D) mm
• Packed unit dimension (carton) :? (W) * ? (H) * ? (D) mm (for all other regions)
• Net weight
• Gross weight : ? Kg (for all other regions)
•
5.15 Transportation
Transportation standards refer to TYE-M0002.

5.15.1 Transportation packages

Packaging and wrapping shall be sufficient to protect the product against damage or loss during shipment
from the supplier to the destination specified in the purchase order. All packaging materials are subject to
test and evaluation per TYE-M0002. The cushion material shall be constructed using EPS material.
5.15.2 Transportation Test
The overall test refer to TYE-M0002.
Vibration, drop test should be performed at ambient temperature(20°C to 23
A. Transportation test specification for all regions except China/India
•
Package test
1. Random Vibration test
2. Drop test
3. Cold Drop test (for design reference)
• Un-package test
Half sine shock test (non operation)
: -5 ° max forward, +25 ° min backward
: +/- 45 °
: 90 ° CCW
? (W) * ? (H) * ? (D) mm (for China/ India)
: ? Kg (Including I/F cable 240 g)
: ? Kg (for China, India)
o
C) and relative humidity (40% to 65% ).
100
190P7
Datasheet pdf - http://www.DataSheet4U.net/