Replacing Components; Replacing A Fan Module; Removing A Fan Module - Cisco Nexus 9372PX Hardware Installation Manual

Replacing Components

•
•

Replacing a Fan Module

Be sure that the replacement fan module has the correct direction of airflow, which means that it has the
Caution
same airflow direction as the other fan and power supply modules in the chassis. Otherwise, the switch
can overheat and shutdown.

Removing a Fan Module

Statement 263—Fan Warning
Warning
The fans might still be turning when you remove the fan assembly from the chassis. Keep fingers,
screwdrivers, and other objects away from the openings in the fan assembly's housing.
Step 1 On the fan module that you are removing, press the two sides of the fan module handle next to where it connects to the
fan module and pull on the handles enough to unseat it from its connectors.
Step 2 Holding the handle, pull the module out of the chassis.
Do not touch the electrical connectors on the back side of the module and prevent anything else from coming
Caution
into contact with and damaging the connectors.
Replacing a Fan Module, page 31
Replacing a Power Supply Module, page 32
Cisco Nexus 9372PX and 9372PX-E NX-OS-Mode Switches Hardware Installation Guide
5
C H A P T E R
31