PEUGEOT 2008 Handbook page 54

Ease of use and comfort
- the windscreen and the side windows
(demisting or defrosting),
- the central and side vents,
- the central vents, the side vents and the
footwells,
- the footwells.
Air flow
F Press the "Full fan" button 2 to increase the
air flow.
The air flow symbol (a fan) appears in the
screen. It is filled in progressively in relation to
the value required.
F Press the "Empty fan" button 2 to reduce
the air flow.
Manual mode
If you wish, you can make a different choice
from that offered by the system by changing
a setting. The other functions will still be
automatically managed.
When you modify a setting, the indicator lamp
in the button 6 goes off.
F Press the button 6 again to return to the
automatic comfort programme.
Deactivating the system
F Press the "Empty fan" air flow button 2
until the fan symbol disappears and "- - -"
appears.
52
This action deactivates all functions of the air
conditioning system.
Temperature is no longer regulated. A slight air
flow can still be felt however, resulting from the
forward movement of the vehicle.
Avoid driving for too long with the system
switched off – risk of misting and of
deterioration of the air quality.
Pressing the "Full fan" button 2 reactivates the
system with the values in use at the time it was
switched off.
Recirculation of the
interior air
The intake of exterior air prevents the formation
of mist on the windscreen and the side
windows.
Recirculation of the interior air isolates the
passenger compartment from exterior odours
and fumes.
This allows hot or cold air to be delivered
more quickly when required.
F Press button 4 to recirculate the interior air/
to permit the intake of exterior air.
When the interior air recirculation is active, the
symbol appears or the indicator lamp comes on
(depending on version).
Avoid prolonged use of the recirculation of
interior air – Risk of formation of mist and
deterioration of the air quality!
Front demist – defrost
With heating
Put the air flow, temperature
and distribution controls to the
appropriately marked position.
With manual air
conditioning
F Put the controls for air
flow 2, temperature 1, and
air distribution 3 in the
appropriately marked position.
F For air conditioning, press button 5; its
indicator lamp comes on.