Next steps
1
Install the
battery
2
Install the
base cover
3
Install the
optical drive
4
Install the
micro SD card
5
Follow the procedure in
Display assembly
Removing the display assembly
Prerequisites
1
Follow the procedure in
2
Remove the
micro SD card
3
Remove the
optical drive
4
Remove the
base cover
5
Remove the
battery
6
Remove the
WLAN
Steps
1
Open the latch and disconnect the optical drive cable and display cable from the system board [1, 2].
2
Peel off the tape securing the wireless antenna from the system board [3].
3
Unroute the display cable from the routing guides on the palmrest and keyboard assembly [4].
after working inside your computer
before working inside your computer
Removing and installing components
57