Stereo Differential Mode Input Configuration; Non-Differential Mode Input Configuration; Place Shunts Horizontally Across Scl And Sda - Texas Instruments TPA2054D4EVM User Manual

www.ti.com
2. Configure the input according to the desired TPA2054D4 operation mode:
a. Stereo Differential Mode (MODE[2:0] = 011):
Install shunts and connect RCA plugs as shown in
Left Channel
Plugs Here
b. For all other modes, install shunts and connect RCA plugs as shown in
Stereo 1
R
RCA Plugs
Here
3. Install shunts in JP2 and JP3 as shown in
from the EVM itself.
SLOU249 – April 2009
Submit Documentation Feedback
L
Figure 1. Stereo Differential Mode Input Configuration
L
R
Figure 2. Non-Differential Mode Input Configuration
Figure 3. Place Shunts Horizontally Across SCL and SDA
Figure 1.
R
Right Channel
Plugs Here
Stereo 2
L
RCA Plugs
Here
Figure 3. This sets the TPA2054D4 to accept I
Shunts, Across SCL and SDA
Operation
Mono Channel
Plugs Here
Figure 2.
Mono Channel
Plugs Here
2
C inputs
TPA2054D4EVM 3