Mounting On A Wall; Separate Purchase (Wall Mounting Bracket) - LG 32LJ51 Series Owner's Manual

Mounting on a wall

(Image may vary depending on models)
Attach an optional wall mount bracket at the rear of the TV carefully
and install the wall mount bracket on a solid wall perpendicular to
the floor. When you attach the TV to other building materials, please
contact qualified personnel. LG recommends that wall mounting be
performed by a qualified professional installer. We recommend the use
of LG's wall mount bracket. LG's wall mount bracket is easy to move with
cables connected. When you do not use LG's wall mount bracket, please
use a wall mount bracket where the device is adequately secured to the
wall with enough space to allow connectivity to external devices. It is
advised to connect all the cables before installing fixed wall mounts.
10 cm
Make sure to use screws and wall mount bracket that meet the VESA
standard. Standard dimensions for the wall mount kits are described in
the following table.
CAUTION
• Disconnect the power cord first, and then move or install the TV.
Otherwise electric shock may occur.
• Remove the stand before installing the TV on a wall mount by
performing the stand attachment in reverse.
• The Screw Cover will protect the opening from accumulating dust
and dirty.
• If you install the TV on a ceiling or slanted wall, it may fall and
Result in severe injury. Use an authorized LG wall mount and
contact the local dealer or qualified personnel.
• Do not over tighten the screws as this may cause damage to the TV
And void your warranty.
• Use the screws and wall mounts that meet the VESA standard. Any
Damages or injuries by misuse or using an improper accessory are
Not covered by the manufacture's warranty.
Separate purchase (Wall mounting
bracket)
32/43LJ51**
32/43LJ52**
Model
32/43LJ53**
32/43LJ54**
VESA (A x B) (mm) 200 x 200
Standard screw M6
Number of screws 4
CAUTION
• Remove the stand before installing the TV on a wall
mount by performing the stand attachment in reverse.
NOTE
• Do not use a sharp object when you detached the cable cover. This
could damage the cable or the cabinet. It may also cause personal
harm.
• Use the screws that are listed on the VESA standard screw
specifications.
• The wall mount kit includes an installation manual and necessary
parts.
• The wall mount bracket in not provided along with the TV set.
• The length of screws may differ depending on the wall mount.
Make sure to use the proper length.
• For more information, refer to the manual supplied with the wall
mount.
• When installing the wall mounting bracket, use the adhesive
label provided. The adhesive label will protect the opening from
accumulating dust and dirt. (Only when the item of the following
form is provided)
• When installing the wall mounting bracket, it is recommended to
cover the stand hole using tape, in order to prevent the influx of
dust and insects. (Depending on model)
49LJ51**
49LJ52**
300 x 300
M6
4
A
B
Provided item
Adhesive label
Stand hole
9