Make a VOID (return) – This transaction can be made only on the same day and
Press the RED "Cancel" button or right button of the joystick
Enter admin PIN password – 1234 and press the
Select sequence NO and press
«VOID USING MAGNETIС STRIP» or «Present Card» screens will appear
Read magnetic strip (right side POS terminal) or chip (front side POS terminal) or
read contactless card, by attaching the card to the terminal screen
The Client should Enter the PIN code of the Card and press the
Check the amount and press the
The first receipt of the merchant. The second receipt of the Cardholder
In case of card payment through Magnetic field and without PIN code -
Client's signature on the payment receipt is required.
Activated contactless settings setup (It is necessary to do every time after
Press "Cancel" button + 9 (at the same time)
Select 4 –SERVICE MENU and press
Enter admin PIN password 23646 and press
Select 7 – Contactless setting and press
Select 1 – Setup and press
Select 1 – Active and press
'PP1000SE' screen will appear and start loading the parameters
Make End of the Day Report (this report is done at the end of the day)
Press the down button of the joystick
Enter admin PIN password – 1234 and press
Press the up button of the joystick
Select 2 – EOD Menu and press
Select 2 (Group balancing) , 3 (Brief report) or 4 (Detailed report) and press
button
Enter admin PIN password – 1234 and press
only with the Customer's card
"Enter"
"Enter"
changing the language POS)
"Enter"
button
"Enter"
button
Make Brief or Detailed transaction reports
"Enter"
"Enter"
button
button
"Enter"
button
"Enter"
button
"Enter"
button
"Enter"
button
button
"Enter"
button
button
"Enter"
button
"Enter"