Radio - JVC KD-T801BT Instruction Manual

GETTING STARTED
[CLOCK]
[TIME SYNC] [ON]: The clock time is automatically set using
the Clock Time (CT) data in FM Radio Data
System signal. ; [OFF]: Cancels.
[CLOCK [ON]: The clock time is shown on the
DISPLAY] display even when the unit is turned off. ;
[OFF]: Cancels.
[ENGLISH]
Select the display language for menu and music
[РУССКИЙ]
information if applicable.
[ESPANOL]
By default, [ENGLISH] is selected.
[FRANCAIS]
6
ENGLISH

RADIO

For key layout on the faceplate, see page 3 or page 4.
Search for a station
1 Press source button repeatedly to select FM or AM.
Press S / T to search for a station automatically.
2
(or)
Press and hold S / T until "M" flashes, then press repeatedly to search for a station
manually.
• "ST" or "STEREO" lights up when receiving an FM stereo broadcast with sufficient signal strength.
• The unit switches to FM alarm automatically when receiving an alarm signal from FM broadcast.
Settings in memory
You can store up to 18 stations for FM and 6 stations for AM.
Store a station
While listening to a station...
Press and hold one of the number buttons (1 to 6).
(or)
1 Press and hold the following button until "PRESET MODE" flashes.
KD-T801BT/KD-T709BT: * ENTER
KD-T706BT/KD-T702BT: Volume knob
2
Perform 'Select an item (page 3 or 4)' operation to select a preset number.
"MEMORY" appears once the station is stored.
Select a stored station
Press one of the number buttons (1 to 6).
(or)
1 Press .
2 Perform 'Select an item (page 3 or 4)' operation to select a preset number.