Upgrade Firmware - Belkin F1UP0001 User Manual

WEB CONFIGURATION
Web Interface – Upgrade Firmware
This menu allows the user to upgrade the Print Server's firmware. Before
running this application, download the new firmware from the Belkin website
at www.belkin.com. Be careful to take note of the location of the downloaded
file on your computer's hard disk. After downloading, click "Browse" on the
screen shown below, select the file name of the downloaded firmware, then
click "Apply Changes". The firmware upgrade will take a few minutes.
NOTE: Do not interrupt the process by removing power from the Print
Server or you could cause permanent damage to the device.
23