Installing Simpleshare Server - SimpleTech SimpleShare User Manual

I S
NSTALLING IMPLE
1 Connect the provided Ethernet cable to the Network
connector on SimpleShare's rear panel. Connect the
other end of the cable to your switch, router or directly to
your computer.
2 Connect the low voltage connector on the AC power
adapter to SimpleShare's DC-IN jack. Connect the
power plug on the other end of the adapter to a live
120/240V electrical outlet, surge protector or UPS
(uninterruptable power supply).
Only use the AC power adapter that came with SimpleShare.
Using any power adapter, other than the one provided by
SimpleTech, may damage SimpleShare and voids your
warranty. SimpleTech assumes no liability for damage
resulting from improper use.
3 Momentarily press the Power push button to power on
SimpleShare.
The only way to shut off power completely to SimpleShare is
to disconnect the power plugs from the power source. Make
sure the power cords for SimpleShare are within easy reach
so that you can unplug SimpleShare when you need to do so.
Installing SimpleShare
S S
HARE ERVER
2