4
Choose
Run Short Test
, depending on the type of self-test you
Run Long Test
want to perform.
Run Short Test performs a quick check to verify that the
drive is fully operational. Run Long Test performs a
comprehensive test of the disk drive.
5
If you want SimpleShare Administrator to display an
onscreen message when the self-test completes, select
Notify Test Results.
6
Click
to begin the testing disk drive.
Run Self Test
If Notify Test Results is selected, when the self-test
completes a yellow banner containing the test results
appears across the top of the SimpleShare Administrator
page you are on. Clicking the hyperlink in the clears the
notification and displays the health report.
7
In the confirmation dialog, click
8
Click
to return to the Disk Management -
Continue
Basic page.
Managing SimpleShare
Run Short Test or
.
OK
Basic Disk
50