Setting The Clock; Contents - Worcester DT20 Instruction Manual

1
2
3 3
4
5 5
6
7 7
8
12

SETTING THE CLOCK

FITTING & OPERATING INSTRUCTIONS FOR WORCESTER BOSCH
SETTING THE CLOCK
1 Press the 'set?' button until ‘SET’ &
'CLOCK?' are shown in the display
2 Press 'OK' displays '24hr' & 'ON'
3 Press ‘+’ to toggle between 24hr
and 12hr display
4 Press 'set?' to set the clock and the
hours flash on the display
5 Press ‘+’ or ‘-’ to correct hour
Note: speed up the display by holding
down the ‘+’ or ‘-’ buttons.
6 Press the ‘set?’ button to set the
correct hour
7 Press ‘+’ or ‘-’ to correct minutes
8 Press the ‘set?’ button to set the
correct minutes. ‘SET’ & ‘DATE?’
appears in the display.
Note: if the day displayed is incorrect
the date needs resetting. To change
the date see ‘SETTING THE DATE’.
If you do not wish to change the date,
press ‘set?’ to return to normal display.
TWIN CHANNEL DT20 PROGRAMMER
8-716-106-647 issue b (11.04) UK

CONTENTS

ACCESSORY INFORMATION
GENERAL INFORMATION
TECHNICAL DATA
INSTALLATION & COMMISSIONING
FITTING THE DT20
USER INSTRUCTIONS
OPERATING CONTROLS
PRESET PROGRAMS
SETTING PROGRAMS
Setting CH Mon-Fri • Setting HW Mon-Fri
Setting individual weekdays
Setting CH Sat-Sun • Setting HW Sat-Sun
Setting individual weekend days
SETTING HOLIDAYS
SETTING THE CLOCK
SETTING THE DATE
SERVICING & SPARES
MAINTENANCE & SPARES
FITTING & OPERATING INSTRUCTIONS FOR WORCESTER BOSCH
TWIN CHANNEL DT20 PROGRAMMER
8-716-106-647 issue b (11.04) UK
2
3
4
5
6
7
8
9
10
11
12
13
14
1
CONTENTS