Cooktop Controls - Electronic Touch Controls; Cooktop Controls - Whirlpool WCE55US0H User Instructions

36" (91.4 cm) Model WCE97US6H Touch-Activated Electronic Control Model shown
A. Ceramic glass cooktop
B. 6" (15.2 cm) single element
C. 12"/10"/6" (30.5 cm/25.4 cm/15.2 cm)
D. Right rear warming zone
COOKTOP CONTROLS – ELECTRONIC TOUCH
Wi-Fi Connectivity
Connect to Network: Download the Whirlpool
■
app store on your mobile phone. See the Connectivity Setup
sheet for more detailed instructions.
SAID Code: The SAID code is used to sync a smart device
■
with your appliance.
The SAID code plate is located on the metal cabinet
underneath the cooktop. See the following illustration.
A. Model/serial number plate
B. SAID code for Wi-Fi connection
MAC Address: MAC Address is displayed for the Wi-Fi
■
module.
B
A
H
DUA L E L E M E N T
G
triple element
CONTROLS

Cooktop Controls

®
app from the
B A
C
T R I P L E E L E M E N T
ON ON ZONE WARM
OK
OFF OFF SIZE ZONE
ON ZONE ON
OFF SIZE OFF
Hold Wifi Timer
3 sec
F
E. 6" (15.2 cm) single element
F. Control panel
G. 10"/6" (25.4 cm/15.2 cm)
dual element
H. Model and serial number plate (located
underneath cooktop on metal cabinet)
Wi-Fi Radio: Turn Wi-Fi on or off.
■
Turn off all controls when done cooking.
Failure to do so can result in death or fire.
The electronic touch controls offer a variety of heat settings
for optimal cooking results.
For maximum element operation, all cooktop electronic touch
controls can be set to High when bringing liquids to a rapid boil.
When the cooktop is turned on or after power is restored to the
cooktop after a power failure, all temperature setting lights will
glow for 10-15 seconds. After the lights go off, the cooktop is
ready to use.
To Use:
1. Touch ON/OFF for the desired element.
2. Touch the UP or DOWN keypad to select the power level.
D
WA R M ZO N E
E
WARNING
Fire Hazard
5