Pxie-3610 Front Panel And Leds - National Instruments PXIe-3610 Getting Started Manual

greater than the RF and DC specifications of the mmWave Transceiver System TX LO1,
TX IF OUT, RX LO1, and RX IF IN connectors.

PXIe-3610 Front Panel and LEDs

Connector
0 Digital connector for the in-phase/quadrature (I/Q) data. Must be connected to
the PXIe-7902.
1 Digital connector for the I/Q data. Must be connected to the PXIe-7902.
2 Digital connector for the I/Q data. Must be connected to the PXIe-7902.
3 Digital connector for the I/Q data. Must be connected to the PXIe-7902.
REF OUT Output terminal for an external reference signal for the sampling clock of the
device. REF OUT is an MMPX (f) connector with 96 MHz output. The output
is not always active and must first be configured.
PXIe-3610
I/Q Generator
ACCESS ACTIVE
0
1
2
3
REF
2 Vp-p
DIFF MAX
OUT
+10 dBm 0 V cm
NOM
REF IN
2 Vp-p
DIFF MAX
+13 dBm
MAX
ALL PORTS 50 Ω
Table 8. Connector Descriptions
Description
mmWave Transceiver System Getting Started Guide | © National Instruments | 61
I+
I–
Q+
Q–