System Setup; Unidirectional System Setup - National Instruments PXIe-3610 Getting Started Manual

Figure 3. Completed Tripod and mmWave Radio Head Assembly
Related Information
Connecting mmRH-3647/3657 Radio Heads to a Bidirectional System
Connecting mmRH-3647/3657 Radio Heads to a Unidirectional System

System Setup

This section describes how to connect the modules of your mmWave Transceiver System.
The mmWave Transceiver System modules arrive pre-installed in the chassis.
Notice Modifying or reserving system-required PXI triggers will cause runtime
synchronization errors and prohibit system function.
Related Information
Trigger Configuration
Refer to the NI-mmWave Manual on ni.com for more information about trigger routing.

Unidirectional System Setup

This section describes how to connect the modules of a unidirectional mmWave Transceiver
System.
Unidirectional mmWave Transceiver System configurations are as follows:
• Unidirectional SISO (baseband)
• Unidirectional SISO (baseband and IF)
• Unidirectional MIMO (baseband)
• Unidirectional MIMO (baseband and IF)
10 | ni.com | mmWave Transceiver System Getting Started Guide
on page 57
on page 49
on page 42