1. Press the Power Button to turn off the printer.
2. Make sure the Battery is installed and media is loaded.
3.
Press and hold the Feed Button, and then press the Power
Switch to turn on the printer.
4.
After printer starts to print, release the Feed Button.
5.
Wait until printer finishes printing, then press the Power Switch
or Feed Button to resume normal printing mode.
Sample printout of Configuration (Self-Test):
31
AME Series User's Manual
Firmware version
Firmware Version
Printed label length
Flash memory capacity
RS-232 parameters
Media type setting
Standby duration (in minutes)
Bluetooth PIN code