Configure Your Zotac Gaming Mek Ultra Pc Gaming System; Configuring A Wireless Connection; Configuring A Wired Connection; Using A Static - Zotac MEK ULTRA User Manual

Configuring your ZOTAC GAMING MEK Ultra PC Gaming System

Configuring a wireless connection

Please follow the instructions below to connect to a wireless network:
1. Double-click the wireless network icon (pic) in the notification area.
2. Select the wireless network you want to connect to from the list and
click Connect.
3. After connection is established, you will see "Connected."
Note 1: For security concerns, Do NOT connect to an unsecured network,
otherwise, the transmitted information without encryption might be visible to
others.
Note 2: Enter the network security key if necessary.

Configuring a wired connection

Using a static IP
1. Connect one end of the Ethernet cable to
your Internet Service Provider (ISP)
modem/router.
2. Connect the other end to the Ethernet port in
the rear of the MEK Ultra PC Gaming System.
3. Highlight "Internet Protocol (TCP/IP)" and
click "Properties".
4. Select "Use the following IP address".
5. Enter your IP address, subnet mask and
Default gateway.
6. Enter the preferred DNS server address if
necessary.
7. After entering all of the related values, click "OK" to finish the configuration.
ZOTAC GAMING MEK ULTRA PC GAMING SYSTEM
19