Rejecting A Call - Silvercrest KH 2377 Operating Instructions Manual

Handling and operation
NOTICE
► Do not mount the microphone in the vicinity of speakers otherwise the voice
quality may deteriorate.
Call accept/end
With an incoming call you hear the call signal via your mobile phone, whilst in
the device's display is shown the call number.
You accept an incoming call by pressing the TALK button on the micro-
phone unit or the
You end the call by pressing the TALK button again on the microphone unit
or the

Rejecting a call

With an incoming call press the
remote control to reject the call.
To call
Press the
DIAL appears in the display.
With the number buttons on the device and/or on the remote control enter
the telephone number that you want to call.
Press the
in the display.
Redial
Hold down the TALK button on the microphone unit or the
the device and/or on the remote control for approx. 2 seconds.
–
–
KH 2377
button on the device and/or on the remote control.
button on the device and/or on the remote control.
button on the device and/or on the remote control.
button again. The number is dialled and CALLING appears
If previously no call number was selected via the number buttons on the
device and/or the remote control the last selected mobile phone call
number is dialled.
If previously a call number was selected via the number buttons on the
device and/or the remote control this call number is dialled.
button on the device and/or on the
GB
IE
button on
31