Table of Contents
Advertisement
opens after the default Operating System. Users can
manually choose to open data connection. When using
the single card, drop down the status bar, touch "Data
Connection" . Choose Settings>SIM card>Cellular
Data>select SIM1 or SIM2, touch drop-down "Data
Connection" of the status bar in the current selected
SIM card data connection, and then touch "Data
Connection". Close this SIM card data connection.
4. Bluetooth
Turn on Bluetooth or set the phone so it can be
detected.
1. Press Home>Menu, then go to "Settings".
2. Touch "Wireless and Internet", then choose
"Bluetooth" to open the Bluetooth function. The
status box will show this icon
Devices"for it to start scaning for devices located
within range.
3. If you touch "Bluetooth settings", all the devices
founded will display in the list under the icon.
(Your bluetooth device is set open and visible to any
nearby equipment. Any equipment that has bluetooth
activated can search for your bluetooth and attempt
matching).
After a paired devices, the system will show the paired
device and other equipment available.
8
. Touch "Scan for
• Pairing and connection of Bluetooth headset:
1. Press Home>Menu, then touch "Settings".
2. Touch Wireless and Internet>Bluetooth settings,
then select the Bluetooth box. Your phone will scan
for the Bluetooth devices within range and show the
founded devices in the list under the icon.
• Tips:
a. If the device can't find your equipment, touch
"Scanning Equipment" to re-scan it.
b. Make sure that the devices you're searching for are
under the detectable mode.
c. Touch headset in the equipment list to finish the
connection.
Notice: Only on pairing
needed
devices. Once connected,
there
identify partnership or
exchange of information.
If you already connect
one headset and want
to
one, the first one will be
disconnected. If you want
to switch to the first one,
you should reselect it
manually in the Bluetooth
equipment list.
• Notices: generally, Bluetooth devices need a password
to be paired. 0000 is often used as the default password.
• The pairing and connecting status will show under the
headset in the Bluetooth device list. When the status
box shows this icon
it means you're connected. Now
you can use the headset to make or receive calls.
• End Bluetooth Connection
1. Press Home>Menu>Settings>Wireless and
Internet>Bluetooth settings.
between
two
is
no
need
to
connect
a
second
9
Advertisement
Table of Contents
