Wi-Fi - Pixela Corporation Infineum Z45 Manual

Hide thumbs Also See for Infineum Z45:
Table of Contents

Advertisement

3. Wi-Fi

Wi-Fi provides as far as 300 feet or 100M range of
wireless network access. If you want to connect your
cellphone by Wi-Fi, you should connect to the nearest
wireless access point or hotspot.
• Notices: The availability and coverage of the Wi-Fi
signal depends on the number, infrastructure and other
devices connected to the signal.
Open Wi-fi and to connect to the wireless network do
the following:
1. Press Home>Menu. Then touch Settings>Wi-Fi and
Internet.
2. Select the Wi-Fi box to open Wi-Fi. The phone will
automatically scan for available wireless networks.
3. Touch Wi-Fi settings. A list of Wi-Fi networks will
appear, showing the founded network name and
security settings.
(Open network or WEP WPA/WPA2 with password).
If you enable the notification in Wi-Fi settings, the
status box will show this icon
wireless networks are found.
4. Choose one of the Wi-Fi choices to connect to the
network. When you choose open network, the phone
will connect to it automatically. If you choose WEP WPA/
WPA2 with password, you should type the password
first, then touch to connect it.
• Notices: when the phone is connected to the wireless
network, the status box will show this Wi-Fi icon
and the approximate signal strength (the number of lit
bars). When the connected network is touched it will
display the name of the Wi-Fi network, status, speed,
signal, strength, security, information and IP address.
6
, when open available
,
If you want to delete the wireless settings, please touch
"Forget", as shown in the picture. If you want to connect
to this network, you should re-enter these settings.
• Notice: To save the network there is no need to re-
enter the corresponding password when connecting to
the previously encrypted wireless network. Wi-Fi will
search automatically for you. You don´t need to perform
additional steps to connect to the Wi-Fi networks.
Unless you choose not to save the network with
password, otherwise, there is no need to re-enter the
corresponding password when next time connecting to
the previously encrypted wireless network.
• Connect to other Wi-Fi networks
1. In the interface of wireless and network, touch Wi-Fi
settings. The founded Wi-Fi networks will show on the
Wi-Fi network list.
2. Touch other Wi-Fi networks to connect to a new
network.
• Notices: in addition, your mobile phone can also
surf the Internet by GPRS. The current SIM card GPRS
7

Advertisement

Table of Contents
loading

Table of Contents