Communication Settings; Set Ip Address, Ip Mask And Gateway For Advanced Web Module - Siemens IQHeat User Manual

IQHeat
User manual

9.10 Communication settings

9.10.1 Set IP address, IP mask and gateway for Advanced WEB module

If the communication module for IP/Ethernet is used, connect the accompanying TP cable to the output for
Internet traffic. The communication module is set in DHCP mode i.e. it gets its address automatically from the
server.
If a fixed IP address is used, this can be set via the Operator panel.
Here is a description of how to set the IP address. The IP Mask and Gateway are set in the same way.
5. Go back to the SMS menu and select SMS
number.
6. For information on settings made in the time
program see 7.2.Heat time program.
Instead of operating mode, the telephone
numbers in time program for SMS numbers are
listed.
1. From the Main index select Systemobjects.
2. Now select Communication > Communic.modules
> 1-Web module.
3. Select Given IP and enter the desired IP address.
4. Press OK to save the new settings.
5. Set Write settings. to Active.
6. Restart to activate the settings.
30