Handle Installation Instructions - Whirlpool 7S21FNI SL User Manual

Handle Installation Instructions

Decorative Retaining Bar Installation Instructions
Decorative
Retaining Bar
1. First, take the decorative retaining bar out from refrigerator, use cross recessed screwdriver to set
the screw on the bottom beam. Fix it tight with all the screw thread twisted through the hole.
2. Second, cover the screw by screw cap.
3. Third, tear off the protective film before using.
Handle Installation Instructions
1. First, take the handle set bolts from the refrigerator, use cross recessed screwdriver to set the bolt
on the door. Fix it tight with all the screw thread twisted through the hole.
2. After the first step is completed, take the door handle out from the refrigerator, fix the handle hole
with the screw.
3. Use rubber mallet or similar tool to tap the handle from the top down, and shake the handle, so as
to confirm that the handle is well installed.
Screw
Screw Cap
14