Table of Contents
Advertisement
Power Management
Primary Battery Charge Configuration
Table 11. System setup options—POST Behavior menu
POST Behavior
Adapter Warnings
Fn Lock Options
Fastboot
Extended BIOS POST Time
Full Screen Logo
Warnings and Errors
Table 12. System setup options—Virtualization Support menu
Virtualization Support
Virtualization
VT for Direct I/O
Table 13. System setup options—Wireless menu
Wireless
Wireless Switch
Wireless Device Enable
Table 14. System setup options—Maintenance menu
Maintenance
Service Tag
Asset Tag
BIOS Downgrade
Data Wipe
BIOS Recovery
74
System setup
Set the primary battery charge settings with a preselected custom charge start and
stop.
Default: Adaptive.
Enable adapter warnings.
Default: Enabled.
Enable or disable the Fn lock mode.
Enable to set the speed of the boot process.
Default: Thorough.
Creates an additional pre-boot delay.
Enable to display full screen logo.
Specify whether the boot process will continue or prompt for user input when
warnings and errors are detected.
NOTE:
Critical errors will always halt the system.
Specify whether a Virtual Machine Monitor (VMM) can utilize the additional hardware
capabilities provided by Intel Virtualization Technology.
Specify whether a Virtual Machine Monitor (VMM) can utilize the additional hardware
capabilities provided by Intel Virtualization Technology for Direct I/O.
Determine which wireless devices can be controlled by the Wireless Switch.
Enable or disable internal wireless devices.
Display the computer's Service Tag.
Create a computer Asset Tag.
Control flashing of the system firmware to previous revisions.
Enable to securely erase data from all internal storage devices.
Enable the user to recover from certain corrupted BIOS conditions from a recovery
file on the user primary hard drive or an external USB key.
Advertisement
Table of Contents
