Before Requesting Service - Panasonic NN-ST64JW Operating Instruction And Cook Book

Before Requesting Service

The oven causes
interference with my TV.
Steam accumulates
on the oven door and warm
air comes from the oven
vents.
I accidentally ran my
microwave oven without
any food in it.
PROBLEM
Oven will not turn on.
Oven will not start cooking.
When the oven is turning
on, there is noise coming
from Glass Tray.
" " appears in the display
window.
"H97", "H98" or "H00"
appears in the Display
Window.
If it seems there is a problem with the oven, contact an authorized Service Centre.
THESE THINGS ARE NORMAL
Some radio, TV, Wi-Fi, cordless telephone, baby monitor, blue tooth
or other wireless equipment interference might occur when you cook
with the microwave oven. This interference is similar to the interference
caused by small appliances such as mixers, vacuums, blow dryers, etc.
It does not indicate a problem with your oven.
During cooking, steam and warm air are given off from the food. Most
of the steam and warm air are removed from the oven by the air which
circulates in the oven cavity. However, some steam will condense on
cooler surfaces such as the oven door. This is normal.
Running the oven empty for a short time will not damage the oven.
However, we do not recommend this.
POSSIBLE CAUSE
The oven is not plugged in
securely.
Circuit breaker or fuse is tripped or
blown.
There is a problem with the outlet. Plug another appliance into the
The door is not closed completely. Close the oven door securely.
Start Pad was not pressed after
programming
Another program has already been
entered into the oven.
The program has not been entered
correctly.
Stop/Reset Pad has been pressed
accidentally.
The roller ring and oven bottom
are dirty.
The Child Lock was activated by
pressing Start Pad 3 times.
The display indicates a problem
with microwave generation system.
– 29 –
REMEDY
Remove plug from outlet, wait
10 seconds and re-insert.
Reset circuit breaker or replace
fuse.
outlet to check if the outlet is
working.
Press Start Pad.
Press Stop/Reset Pad to cancel
the previous program and
program again.
Program again according to the
Operating Instructions.
Program oven again.
Clean these parts according
to care of your oven (See next
page).
Deactivate Lock by pressing
Stop/Reset Pad 3 times.
Contact the specifi ed service
centre.