Firmware Version Information Mode - Kenwood TK-3310 Service Manual

■ Item setting mode fl ow chart
[3. TX frequency]
LMR model only
[S]
MHz setting
[<B] / [C>]
[A]
[Selector]
kHz setting
[<B] / [C>]
[A]
[Selector]
Channel step
[<B] / [C>]
[A]
[Selector]
Frequency clear [S] : Cleared
[A]
[Selector]
[4. TX signaling]
LMR model only
[S]
OFF
[S] : Tone off
[A]
[Selector]
QT
[<B] / [C>]
[A]
[Selector]
DQT N
[<B] / [C>]
[A]
[Selector]
DQT I
[<B] / [C>]
[A]
[Selector]
Display
Current
490. 00000 : X(LMR)
setting value
or
476.42500 : X(CB)
Value is not set
--------
490. 00000
[S]
490. 00000
[S]
STP 5.00K
[S]
--------
Display
TONE OFF
QT 67.0
[S]
DQT 023N
[S]
DQT 023 I
[S]
LMR model only
5. RF power Hi / Low
[S]
Hi / Low selection
[A]:
[S] : Stored
Not
stored
6. Scan Del / Add
[S]
Del / Add selection
[A]:
[S] : Stored
Not
stored
[7. Beat shift on/off] or
[8. Compander on/off]
[S]
on / off selection
[A]:
[S] : Stored
Not
stored

6. Firmware Version Information Mode

Turn the transceiver ON with the [Side1] and [Side2] keys
held down. Then, the version is displayed during holding the
[Side1] and [Side2] keys.
TK-3310
[<B] / [C>]
Display
Hi Low 5.PWR HI
[<B] / [C>]
Display
Del Add 6.SCN ADD
[<B] / [C>]
Display
on off 7.SFT ON or
8.CMP ON
9