Rtc Battery - HP Pavilion 15-bc300 Maintenance And Service Manual

RTC battery

Description
RTC battery
Before removing the RTC battery, follow these steps:
1. Prepare the computer for disassembly
2. Remove the base enclosure (see
3. Disconnect the cable from the battery (see
components:
a. Solid-state drive (see
b. Fans (see
c. System board (see
Remove the RTC battery:
1. Position the removed system board upside down.
2. Use a non-conductive tool to pry the battery from the socket (1), and then remove the battery from the
system board socket (2).
Reverse this procedure to install the RTC battery.
56 Chapter 5 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
Base enclosure on page
Solid-state drive (M.2) on page
Fans on page 52).
System board on page
34)
Battery on page 36), and then remove the following
41).
53).
Spare part number
741976-001
34).