Industrial Ethernet; B3L−40 - Siemens CP 343-1 User Manual

7 Web Diagnostics
7.2.5

Industrial Ethernet

"Parameters" Tab
This page shows you the various parameters of the MAC address, the IP address
and the LAN attachments.
Parameter
Network attachment
MAC address Active MAC address of the CP
(active)
MAC address MAC address set in the factory
(factory setting)
Device name Device name configured in STEP 7 (properties dialog, "PROFINET" tab)
IP parameters
IP address IP address of the CP
Subnet mask Configured subnet mask
Default router IP address of a configured router
IP settings How the IP address is assigned (for example, STEP 7, DHCP ...)
Physical properties
Port number Number of the LAN port of the CP: 1, 2
Link status Status of the LAN port:
S
S
Setting Display of the individual network settings configured in STEP 7:
S
S
Mode Displays the current network properties (transmission rate and direction). Possible
values:
S
S
S
S
B3L−40
OK
no link
Configured
automatic (automatic setting / autonegotiation)
10 Mbps half duplex
10 Mbps full duplex
100 Mbps half duplex
100 Mbps full duplex
Function
CP 343-1 Lean for Industrial Ethernet / Manual Part B3L
Release 03/2007
C79000-G8976-C198-04