Identification - Siemens CP 343-1 User Manual

7 Web Diagnostics
7.2.2

Identification

Here, you can see a variety of information on the CP for identification and
maintenance.
Parameter
Identification
1)
Plant designation Plant designation of the CP if this was configured.
1)
Location identifier Location identifier of the CP if this was configured.
Serial number Serial number of the CP
Order number Order number of the CP
Version
Hardware Hardware version of the module
Firmware Version of the stored firmware
1)
A CP acting as PROFINET IO device can be informed of the plant designation
and location identifier by the PROFINET IO controller using the "write data
record" function. This is done using the maintenance data record "IM1" with
index AFF1
The "write data record" function is explained in detail in the general part A of the
manual in the description of the FCs for PROFINET IO.
B3L−36
.
H
Function
CP 343-1 Lean for Industrial Ethernet / Manual Part B3L
Release 03/2007
C79000-G8976-C198-04