Startup; Basic Settings Via Browser - Siemens Server Installation, Operation And Maintenance Manual

Before startup, a connection to the ChemWeb Server must always be established! This can be any
connection (see chapter 3).
When starting the Internet Explorer for the first time, the Internet connection wizard might be started.
It should be aborted!
Basic settings via a Browser
If the connection to the ChemWeb Server was configured properly, access is possible via a Java-
capable Internet Browser. For this purpose, there must be an existing connection to the ChemWeb
Server available, the Internet Browser must be started and the IP address must be typed in the address
line.
If this screen appears, the connection to the ChemWeb Server is correct. Under the submenus of
"Server Setup" in the left window, further configurations can be defined.
The submenus
- ISP Configuration
- Mail Configuration
- Event Configuration
- Name Configuration
- Server Commands
of "Server setup" are password-protected and can be only be called after entering the correct CGI user
name and CGI password.
The time setting of the ChemWeb Server should be checked first and
corrected, if necessary (see chapter 4.1.5).
23

Startup