Mobile Phone Link Scetion; Bluetooth Scetion - Soundstream VRN-DD7HB Owner's Manual

MOBILE PHONE LINK SCETION

Note: Mobile phone link function can only
be available:
Used for Android system phone. Do not
support iphone till now.
Set your phone's "USB debug mode" is
opened.
Connect the Bluetooth with Head unit.
When start to operate phone link function, firstly
set the phone to USB debug mode; connect the
USB cable with mobile phone; then confirm your
phone has already connected with unit via
Bluetooth and then tap Phone Link icon on the
main menu enter to Phone link mode.
And you can see below menu, and the unit will
automatically connect your mobile phone (MOB),
and install a APP into your mobile, after finished
BULETOOTH SCETION
Warn ing : D r i v i n g a n d h a v i n g a Te l e p h o n e
conversation at the same time is dangerous,
please park your car before having a telephone
conversation. The supplier waves any and all
liability when this warning is not followed.
To enter Bluetooth mode, you can tap
BT-Phone icon on Main menu or long press
the mute/Bluetooth button on the Remote
Control or press mode button on remote or
on front panel.
BT Phone
Device not connected
SoundStream
*
Console
Tap Dial button to enter call mode.
Tap this button can see phonebook.
Tap this button can see missed, received
and dialed calls.
20
x
1 2 3
4 5 6
Redial
7 8 9
Transfer
+
/
0
#
those 2 step, then, unit will be indicated your
phone menu in the unit and you can control the
phone through the unit.
SL01.3.3.53
If you want to enjoy your music from all speakers,
please enter into the Bluetooth Music mode in
bottom panel.
Tap this button Making and accept calling.
Tap this button to hang up the call.
Pairing Mode
At the first time when using BLUETOOTH, you
need to pair the mobile phone first.When a phone
has not been paired with the unit, the BT icon and
pairing mark will blink continually on the panel.
When the unit have connect with phone, the BT
icon will turn on and the Mobile phone name (if
available) will be display on the panel.
According to mobile pairing device manual,after
searching new device (SoundStream), select it,
input password "0000" and confirm ok, device
paring is finished.
The text 'Enter Number' will shows on the panel
after the pairing is completed. It means device
i s c o n n e c t e d a n d r e a d y f o r B L U E T O O T H
communication.
Auto-connect – Disconnect
When power on the unit, the last paired phone will
b e c o n n e c t e d t o t h e d e v i c e v i a B l u e t o o t h
automatically, after searching about one minute,
if the device cannot find the paired phone, it will
s t o p s e a r c h i n g . W h e n i n s t a n d b y m o d e
(unconnected), long press Bluetooth button on
remote control to active auto-connect function
and the device will search the last paired phone.
22
Connecting
1.Connecting your MOB
2.Install Interconneotion service
Enter MOB Setting > Enable Developer Option
> Turn on USB debug > Connect USB line >
Allow USB debug
Retry Exit
!