Table of Contents
Advertisement
If you do not know the network password or you have entered it incorrect-
ly, the following dialog box appears.
Read out Network Password -> Teach
Follow the instructions on the screen and tap OK . This dialog box closes
after approx. 60 seconds.
SIMpad is now connected to the cordless network. Now proceed with the
HomeRF Gateway configuration. How you do this is explained in Chapter
"Configuring HomeRF Gateway" on page 87.
After connecting to the cordless network the following dialog box ap-
pears. You can also open this dialog box via Start “ Programs “ Com-
munication “ HomeRF Configuration .
HRF Gateway Configuration
If you have already configured the HomeRF Gateway (e.g. with a PC), pro-
ceed as described in Chapter "Setting up an Internet Connection" on page
90. Otherwise, please continue reading here.
Advertisement
Table of Contents
