Siemens DTU3005-B Operator's Manual page 14

3
Starting the Software
3. Type in a name for the project up to eight letters
and numbers in the Project Name: field and press
Enter. The Project Type: field will then be high-
lighted. Press the spacebar to display the project
types, which are:
• PLCs to Devices—allows a PLC to control
and/or monitor up to 32 supported Siemens
devices. See Chapter 4 for configuring this
project type.
10
• Modbus Master to Devices—allows a Mod-
bus speaking host system, personal com-
puter running SCADA software, or PLC to read
and write registers in up to 32 supported Sie-
mens devices. See Chapter 5 for configuring
this project type.
• SEAbus Port Expander—allows two Siemens
ACCESS supervisory computers to connect
up to 32 Siemens ACCESS devices. See
Chapter 6 for configuring this project type.
Siemens Energy & Automation, Inc.