Table of Contents
Advertisement
6 Press
or
until Calling Cards is highlighted
7 Press
to open the Calling Cards submenu.
YES
8 Press
or
until Default Card, Card 1 Setup, or Card 2 Setup is
highlighted.
9 Press
to choose the highlighted selection.
YES
You are prompted to enter your PIN and additional calling card
information.
To choose a card to be used as the default card when making calling
card calls, navigate to the
card.
Note!
Only cards that have been set up will appear as options for Default
Card.
Making a Calling Card Call
1 Enter or recall the phone number you want to call.
2 Press and hold
. The calling card number and the active calling
YES
card are shown in the display.
3 Release the key after the number has been displayed.
If you are using stops between numbers, you must press
number key to send the next sequence of numbers. If you use pauses,
the numbers are sent automatically after the specified length of time
chosen for the dialing delay.
Display
The
submenu is used to change the Backlight and Greeting
9v†ƒyh’
on the display of your phone.
31
submenu and select that
9rshˆy‡Ã8h…q
YES
Backlight
Use the
7hpxyvtu‡
backlighting to stay Off or to automatically turn On for 20 seconds
when a call is received or a key is pressed. The two settings for
7hpxyvtu‡
Greeting
Use the Greeting submenu to alter the information that is displayed
when your phone is powered on. You can select which of the three
options you prefer by pressing the
checkbox next to the highlighted item (
press
. If Greeting Text is checked, you will be prompted to edit
YES
your power on greeting.
Language
The
Ghtˆhtr
used in the phone display. The languages vary between markets.
Your mobile phone supports English, French, Spanish, Portuguese,
Russian, and Hebrew.
or any
Note!
Not all languages are available in every market.
Clock
The
8y‚px
stopwatch, and alarm on your phone. The clock will then appear on
your Standby screen.
Set Time
Enter the correct time using the keys on your keypad. Press any
number key to toggle am/pm while am/pm is blinking (if applicable).
Press
YES
submenu to set the display and keypad
are Auto and Off.
or
key to check or uncheck the
*
#
). When you are finished,
submenu allows you to select the display language
submenu allows you to set the time, time format,
to confirm the current time. You can press
or
to
Voice Operation
Advertisement
Table of Contents
