Siemens Gigaset C2 Manual page 18

Using several handsets
If you redirect your room monitor to an external number, then you should tell that
N
number's owner.
The room monitor's call to an external phone number stops after about 90 seconds,
N
to an internal number (handset) it stops after about 180 seconds (depending on the
base).
Always check the settings of the room monitor before you leave
W
home, e.g. sensitivity and phone line.
The room monitor function severely curtails the handset's operating time.
i
If necessary you should place the 'room monitor handset' in the charger
to ensure that the battery does not run down.
Activating the room monitor function and entering the 'call to' number for
the first time
s
MENU;
Additional Features
[__________] [_____________________________________________________________]
Call Internal
[_________] [_________]
OK
or ...
[__________] [_____________________________________________________________] Call External
[_______]
OK
If the room monitor is activated, you go straight to the room monitor setting when you
press the display key
Setting the room monitor's sensitivity
s
MENU;
Additional Features
[_________] [_________]
OK
Deactivating the room monitor
To turn the room monitor off from outside (depends on the base), take the call that the
room monitor has initiated, and press
deactivate around 90 seconds after the call ends. The room monitor will make no
further calls. The other room monitor functions on the handset (e.g. no ringer) will
remain activated until you press MENU and OK on the handset that is in the baby's
room.
18
OK;
Room Monitor
Select the menu item and confirm.
[_________ ]
OK
Select the handset and confirm.
Enter an external number as the 'call to' number:
Select the menu item and confirm.
[_________ ]
OK
Enter the number and confirm.
(open menu).
MENU
OK;
Room Monitor
Select Low or High and confirm.
O R
OK.
s
OK;
Level Features
. The room monitor function will
OK.