Changing The Time Mode; Setting The Alarm Clock - Siemens Gigaset C2 Manual

[_______________]
MENU
[__________] [_____________________________________________________________]
Calender/Clock
[__________] [_____________________________________________________________]
Date/Time
[_______]
OK
[_______]
OK
[__________] [_________]
OK
¼
appears on the bottom line of the display.

Changing the time mode

You can choose between the 12 or 24 hour display (the factory setting is 24 hour).
s
MENU;
Calender/Clock
a
long press (back to idle status).

Setting the alarm clock

Precondition: The date and time have already been set (page 10).
Activating/deactivating the alarm clock
¼
Activate: ;
Alarm Clock
¼
To deactivate: ;
Alarm Clock
Setting the wake-up time
Activate the alarm clock.
[_______]
OK
If you are using the 12 hour clock display, select a.m. or p.m. with
‰
confirm ( = On).
A wake-up call only sounds when the handset is in the idle status and the room monitor
function or Walk and Talk is not activated. When you deactivate the alarm clock the
icon will only go out if there is no active appointment.
i
To find out how to set the wake-up volume and melody, turn to page 20.
Open the menu.
Select the menu item and confirm.
[_________]
OK
Select the menu item and confirm.
[_________]
OK
Enter the date and confirm. Example: For 1.5.2003,
Q1Q5QI
enter
Enter the time and confirm. Example: For 9.35,
QOI5
enter
With the 12-hour display, select a.m. or p.m. and
confirm.
Long press (back to idle status).
s
OK;
Time Mode
‰
OK; ( = On).
‰
OK; ( disappears).
Enter the wake-up time and confirm. The top line of
the screen displays the alarm clock icon
Long press (back to idle status).
.
.
s
(select display) OK (‰ = On);
OK;
s
Date and Time
¼
.
and
¼
11