General Operation - Dual DC208BT Quick Start Manual

Power On/Off
Faceplate Removal
Changing Modes
Volume
Mute
Auxiliary Inputs
Reset
Display
Setting the Clock
Audio / Menu

General Operation

Press the /MODE button to turn the unit on. Press and
hold /MODE button to turn unit off.
Press RELEASE and pull away from the right side to
remove. To re-install, insert left side of faceplate
first then push right side to secure.
Press MODE to select between Radio, DISC, USB,
AUX IN, Bluetooth.
Modes of operation are shown in the display.
Adjust volume using volume knob.
Press to silence the audio. Press
listening at the previously selected volume.
Insert a 3.5mm cable in the units front AUX port.
Press the RESET button to reset the unit back to the
factory settings if abnormal operation occurs. The reset
button is located behind the front panel.
With the unit on, press and hold DISP to display clock time.
DISP
Press and hold
displayed information.
Press and hold volume knob to select clock setting mode.
Rotate the volume knob to right to adjust hours and rotate
volume knob to left to adjust the minutes.
Press volume knob momentarily to select between the
audio functions. Press and hold volume knob for more
than two seconds to select between the menu functions.
Rotate the volume knob left/right to adjust or activate the
desired function/audio.
to toggle display between various
again to resume